AutomationDirect GSD8-240-10C-D, Руководство пользователя

Страница: 9 / 56

Page 9
IronHorse GSD8 DC Drives User Manual – 1st Ed. Rev. A – 10/15/2019
Installation and Wiring
Do not mount controller where ambient temperature is outside the range of -10 to 45 °C (14–113 °F).
I
mpRopeR INstAllAtIoN oR opeRAtIoN of thIs
Gsd8 d
RIve mAy cAuse INjuRy to peRsoNNel oR dRIve fAIluRe
. t
he dRIve
must be INstAlled IN AccoRdANce WIth locAl
,
stAte
,
ANd NAtIoNAl sAfety codes
. m
Ake ceRtAIN thAt the poWeR supply
Is dIscoNNected befoRe AttemptING to seRvIce oR Remove ANy compoNeNts
!!! I
f the poWeR dIscoNNect poINt Is out of
sIGht
,
lock It IN dIscoNNected posItIoN ANd tAG It to pReveNt uNexpected ApplIcAtIoN of poWeR
. o
Nly A quAlIfIed
electRIcIAN oR seRvIce peRsoNNel should peRfoRm ANy electRIcAl tRoubleshootING oR mAINteNANce
. A
t No tIme
should cIRcuIt coNtINuIty be checked by shoRtING teRmINAls WIth A scReWdRIveR oR otheR metAl devIce
.
b
efoRe AttemptING to WIRe the
Gsd8 d
RIve
,
mAke suRe All poWeR Is dIscoNNected
. R
echeck code desIGNAtIoN to
AssuRe pRopeR voltAGe Is pReseNt foR the dRIve
. c
AutIoN should be used IN selectING pRopeR WIRe sIze foR cuRReNt
ANd voltAGe dRop
;
mINImum WIRe sIze
14AWG
foR both
5
ANd
10
Amp models
.
d
o Not ReveRse posItIve ANd NeGAtIve
/
poWeR leAds
,
As thIs WIll dAmAGe the
Gsd8 d
RIve
.
t
o chANGe motoR dIRectIoN
,
INteRchANGe the posItIve ANd NeGAtIve motoR ARmAtuRe leAds
.
cAutIoN!! t
uRN poWeR
off
WhIle mAkING WIRING coNNectIoNs
.
Panel Mounting Diagrams
PANEL MOUNTING GASKET
(WITH THE ADHESIVE SIDE OF
GASKET FACING THE CUSTOMER
MOUNTING PANEL)
CUSTOMER
MOUNTING PANEL
(HOLE CUT-OUT FOR CONTROL
HOUSING APPROXIMATELY
3.622" WIDE BY 1.770" HIGH)
GSD8-240-5C
GSD8-240-5C-D
SUPPLIED WITH EACH CONTROL:
1) GASKET
2) (2) 6-32 X 3/4 PANHEAD BLACK OXIDE STAINLESS SCREWS
3) (2) #6 NUT WITH LOCKWASHER