34
Dual Gate Controller DCB-05
Owner Installation Instructions
The Dual Gate Controller can be instructed, via its
pedestrian control feature, to partly open and provide
pedestrian access but prevent vehicle access. This
is achieved by partly opening the motor 1 gate leaf.
If dual motors are used, motor 2’s gate leaf is held
closed. The partly open position of motor 1’s gate
leaf is initially set to a position halfway between open
and closed. This initial position can be adjusted by the
installer to any position within the gates travel range
by selecting a pedestrian access travel time (from
closed). The setting is accessed from “MENU 10.4 Set
Pedestrian”. The time is adjustable in 1 second steps.
NOTE:
Before setting the pedestrian access position
the gate must be in the fully closed position. As with
the Setting Travel Limit procedure, a transmitter can
be used to complete the pedestrian position setting
procedure.
Step 1. Navigating to “set pedestrian menu”
1. Press PREV to navigate to Menu 10
(Fig. 16)
.
2. Press SET - MENU 10.1 is displayed.
3. Press NEXT to go to MENU 10.4.
4. Press SET to enter Set Pedestrian procedure.
Step 2. Setting pedestrian position
1. Press OPEN or CLOSE to adjust pedestrian drive time.
2. Press SET to record position
3. Press transmitter coded for pedestrian function or push
button wired into pedestrian input to test.
Setting pedestrian position
