Owner Installation Instructions
Dual Gate Controller DCB-05
27
Step 4. Editing the store location
This feature is only available when coding the fi rst
button of a new transmitter.
1. Press NEXT or PREV to move cursor over Store No.
2. Press UP or DOWN to select new Store No
(Fig. 39)
.
3. Press SET to Confi rm or NEXT/PREV to move to
next fi eld.
This is useful when managing transmitters using a
scheme which ties the store location to the owner of
the transmitter.
Step 5. Selection of ID or Serial Number
display
1. Press NEXT/PREV to move cursor over ID fi eld.
2. Press NEXT to reveal Serial Number
(Fig. 40)
.
The serial number display is provided for additional
means of identifi cation. The transmitter in this example
has serial number 123456789.
Step 6. Editing a character fi eld
1. Press NEXT or PREV to move select character
to change.
2. Press UP or DOWN to scroll through and select
new character
(Fig. 42)
.
3. Press NEXT or PREV to move to next character.
4. Repeat step 2.
5. Press SET to record changes
(Fig. 43)
.
The second line of the display shows a list of available
characters with the current value indicated at the
cursor position.
PREV
NEXT
EXIT
SET
OSC PED LGT VAC
124 ID B B SMITH
PRESS
PREV
NEXT
EXIT
SET
56789 ABCDEFGHIJ
124 ID B B SMITH
ABC
42
fi g
43
fi g
Transmitter editing (cont.)
