Owner Installation Instructions
Dual Gate Controller DCB-05
25
Coding transmitters
The Dual Gate Controller can store up to thirty (30)
transmitters in its memory. Each transmitter can be
allocated an alpha-numeric ID label up to eleven (11)
characters in length and each button can be assigned
to one of several control functions. The settings for a
transmitter are represented in
(Fig. 32)
. It shows the
transmitter’s store number, ID label or serial number
and the functions assigned to each of its four buttons.
To toggle between ID/SN display, press UP/DOWN
with the cursor on the ID/SN indicator. The procedures
below code, delete, replace, edit and copy transmitter
records.
BRAND OF TRANSMITTERS
First memory location sets the type of transmitters
which can be stored into the memory of the receiver.
It either can be ATA
TrioCode™ or B&D Tri-Tran™
transmitters.
For example, if fi rst transmitter stored is
TrioCode™
then rest of transmitters can only be the
TrioCode™ type and mixing of TrioCode™ ,Tri-Tran™
is not possible. By deleting all stored transmitter codes
from the receivers memory will allow you to choose
either TrioCode™ or Tri-Tran™ transmitters again.
Coding transmitter button
Step 1. Navigating to “code transmitter”
menu
1. Press NEXT to navigate to the Menu 1
(Fig. 33)
.
2. Press SET to enter code set procedure.
Step 2. Storing transmitter code
1. Controller will prompt to press one of the
transmitter’s buttons.
2. Press the transmitter button you wish to use to
operate the Gate Opener (e.g. button 1)
(Fig. 34)
.
3. Press same transmitter button again as prompted by
display
(Fig. 35)
.
Step 3. Selecting function of the button
The controller will now show the transmitter’s record,
with a cursor on the fi eld for the button being coded
(Fig. 36)
. Use UP/DOWN to select the function for the
button.
Available functions:
VAC (Vacation Mode) LGT (Courtesy Light)
STP (Stop) OPN (Open)
CLS (Close) SWP (Swipe)
PED (Pedestrian access) OSC (Open/Stop/Close)
OFF (No action)
Press SET to save the settings
(Fig. 37)
or EXIT to
abort without saving.
Returning to main screen
The “Code Transmitter” menu will now be shown.
Press EXIT to return to the MAIN SCREEN and test the
transmitter.
)$
.AME3.
/3#0%$,'46!#
34
fi g
MENU 1
PREV
NEXT
EXIT
SET
Code Transmitter
PRESS
35
fi g
36
fi g
37
fi g
PREV
NEXT
EXIT
SET
OSC OFF OFF OFF
# 1[No Name]
PRESS
OSC
PREV
NEXT
EXIT
SET
OSC OFF OFF OFF
# 1[No Name]
PRESS
PRESS
C
PREV
NEXT
EXIT
SET
Again! View>
Press Tx’er
PRESS
33
fi g
PREV
NEXT
EXIT
SET
Button! LIST>
Press Tx’er
PRESS
32
fi g
I.D label/Serial number
Button 4 function
Button 3 function
Button 2 function
Button 1 function
Store number
ID/SN display indicator
