TRANSMITTER OVERVIEW
STEP1, NAVIGATING TO “Code Transmitter” MENU
To navigate to the Menu 1 from the main screen simply press
NEXT. Press SET to start the Transmitter Code procedure.
STEP 2. RECORDING THE TRANSMITTERS CODE
The controller will prompt for you to press one of the transmit-
ter’s buttons. Simply press the transmitter button you wish to use
to operate the Gate Opener Button 1 is used for example.
The controller will respond by prompting for the button to be
pressed again for verification. Press the transmitter button again.
STEP 3. SELECTING FUNCTION OF THE BUTTON
The controller will now show the transmitter’s record, with a cur-
sor on the field for the button being coded. Use UP/ DOWN to
select the function for the button.
AVAILABLE FUNCTIONS
VAC
(Vacation Mode)
LGT
(Courtesy Light)
STP
(Stop)
OPN
(Open)
CLS
(Close)
SWP
(Swipe)
PED
(Pedestrian access)
OSC
(Open/Stop/Close)
OFF
(No action)
If desired, you can continue and edit the other settings, for details
see
TRANSMITTER EDIT PROCEDURE.
STEP 4. SAVING THE CHANGES
Press SET to save the settings or EXIT to abort without saving.
STEP 5. RETURNING TO MAIN SCREEN
The “Code Transmitter” menu will now be shown. Press EXIT to
return to the MAIN SCREEN and test the transmitter.
MENU
1
Code
Transmitter
PRESS
Starting Code Transmitter Procedure
Press
Tx’er
Button!
LIST>
Press Transmitter Button
Press
Tx’er
Again!
VIEW>
Press Transmitter Button Again
18
The controller can store 30 transmitters within its memory Each
transmitter can be allocated an ID label and each button can be
assigned to one of several control functions. The settings for a
transmitter are represented using the screen shown to the right. It
shows the Transmitter’s store number, the ID label or Serial
number and the functions assigned to each of its four buttons.
The ID / SN display is toggled by pressing UP/DOWN with the
cursor on the ID/SN indicator. The procedures below code,
delete, replace, edit and copy transmitter records.
BASIC CODE TRANSMITTER PROCEDURE
THE PROCEDURE BELOW IS USED TO ADD A TRANSMITTER BUTTON TO THE CONTROLLER’S MEMORY.
#
1
[
No
Name
]
OSC
OFF
OFF
OFF
PRESS
Selecting Button Function
C
PRESS
PRESS
PRESS
#
1
[
No
Name
]
OSC
OFF
OFF
OFF
PRESS
Saving Settings
C
123
ID
Name/SN
OSC PED LGT VAC
Button 1 Function
Button 3 Function
Store Number
I.D Label / Serial Number
Button 4 Function
ID / SN display indicator
Button 2 Function
Transmitter Record Display
MENU
1
Code
Transmitter
Return to MAIN SCREEN
PRESS
