TRANSMITTERS LIST MANAGEMENT (cont)
STEP 2. NAVIGATING THE LIST
Once the list is displayed it can be sorted by Store number , ID
Label or Serial number. Use the NEXT and PREV button to select
the sorting method. Note when sorting by ID label or Serial num-
ber, only stored transmitters locations are displayed.The UP and
DOWN buttons can be used to navigate through the list. Note
holding a button down will step through the list faster.
STEP 3. SELECTING LOCATION TO MODIFY.
When the desired location is displayed press the SET button to
display a menu of available functions that can be performed on
the location. The example uses transmitter number 124.
STEP 4. SELECTING AN OPERATION
The four menus below are displayed by repeated presses of the
NEXT or PREV buttons. Pressing EXIT will return back to the
list (STEP 2). Pressing SET will execute the menu’s operation.
CODE OPERATION (LOCATION EMPTY)
If the code operation is selected on an empty transmitter location,
the BASIC CODE TRANSMITTER PROCEDURE will be initi-
ated with the transmitter being saved in the selected location. This
is useful when managing transmitters using a scheme which ties
the store location to the transmitter’s owner.
CODE OPERATION (LOCATION USED)
If the code operation is selected for a location that already
contains a transmitter, then the BASIC CODE TRANSMITTER
PROCEDURE will be initiated and the new transmitter will
replace the existing one. Note that the button functions and name
of the existing transmitter will be transferred to the new
transmitter. This procedure is of great convenience when replac-
ing a lost transmitter.
DELETE OPERATION
The delete operation is used to remove a transmitter from
memory along with the name and button function settings.
EDIT OPERATION
The edit operation displays the transmitter record for editing pur-
poses. See TRANSMITTER EDIT PROCEDURE for details.
COPY OPERATION
The copy operation is used to code multiple transmitters with the
same button function as that of the selected transmitter. Once
selected an abbreviated code set routine is initiated which repeats
steps 2 & 3 of the BASIC CODE TRANSMITTER PROCE-
DURE for each transmitter to be coded. The coding is terminated
by pressing the EXIT button.
STEP 6. EXITING THE LIST
To exit the transmitter list simply press EXIT to return to the Code
Transmitter Menu.
21
Navigation Through List
PRESS
PRESS
12
I
ID
D
B
B
SMITH
OSC
PED
LGT
VAC
4
Selecting The Location
PRESS
124
I
ID
D
B
B
SMITH
OSC
PED
LGT
VAC
4
MENU
1.2
Delete
TX#
124
MENU
1.3
Edit
TX#
124
Code / Replace Menu
MENU 1.1
Code
TX#
124
Delete Transmitter Menu
Edit Transmitter Menu
MENU
1.4
COPY
TX#
124
Edit Transmitter Menu
