Automatic Heating Modulex E8, Инструкция по эксплуатации и руководство пользователя

Страница: 34 / 70

MODULEX CONTROLLER OPERATION
32
F
low
T
emp
er
atu
re
(
C
)
100
95
90
85
80
75
70
65
60
55
50
43
37
30
25
20
15
21 1 8 15 12 10 7 4 -2 - 1 -4 -6 - 10 -12 -14 -16
Outside Temperature (
°
C )
Figure 4-1. Heat Slope Diagram
9. Turn the Rotary Knob until the desired HEATSLOPE value is displayed.
10. Press the Program Key to store the HEATSLOPE value.
11. Continue scrolling through the HTG CIRCUIT 1 sub-menu until RETURN is displayed. Press the
Program Key to exit the HTG CIRCUIT 1 sub-menu.
12. This completes the required Indoor/Outdoor Reset Mode set-up instructions.
4.1.3 Viewing Boiler Set Point
The set point temperature is viewed in the DISPLAY menu as follows:
1. Turn the Rotary Knob to the DISPLAY menu. The first sub-menu displayed will be
INSTALLATION.
2. Press the Program Key to enter the INSTALLATION sub-menu.
3. Turn the Rotary Knob clockwise until T-COLL DES is displayed along with corresponding
temperature reading. This T-COLL DES reading equals the boiler set point.