Automatic Heating Modulex E8, Инструкция по эксплуатации и руководство пользователя

Страница: 32 / 70

MODULEX CONTROLLER OPERATION
30
3.7.1 Additional Instructions for CAP/MODULE Function
When the Program Key is pressed with CAP/MODULE displayed, the display may show
“SCAN”,
indicating that the Controller is searching for related MODULE (BOILER) functions. Once the scan is
complete, proceed as follows:
1. Press the Program Key. The display will show CODE NO., requesting the valid code to be
entered.
2. Enter code 0000 (4 zeros) by pressing the Program Key four times. The red LED will remain lit
while the four code digits are entered.
3. Press the Program Key
4. The display will show BOILER 1 (meaning Heat Module 1), along with kilowatt (kW) setting for the
first Module. The default setting for each Boiler Module is 40 kW or 110 kW for SuperModulex.
5. If the desired kW setting is not displayed, press the Program Key and change the setting using the
Rotary Knob. Once the desired setting is displayed, press the Program Key to store the value.
6. Continue scrolling through each BOILER (Heat Module) and observe the kW setting for each one.
Change as needed by repeating step 5.
7. Once all BOILER MODULES have been set, RETURN will be displayed.
8. Press the Program Key to continue with the next menu function (RELAY FUNC 1) in the
INSTALLATION Menu Table.
3.7.2 Available Settings for Relay Functions 1
– 4 (RELAY FUNC 1 thru 4)
Table 3-7 lists the available Function selections for Multi-Function (MF) Relays 1 thru 4:
Table 3-7. Available Relay Functions
FUNCTION DESCRIPTION
00 No MF Relay Function
01 Header Pump
02 Circulation (Time)
03 Booster Pump
05 Pump HS1
06 Pump HS2
20 Temperature-Controlled Circulation Pump
21 Pulsed Circulation Pump
22 Solid Fuel Boiler Integration (Not Applicable)
23 Solar Integration
24 Return Flow Temperature Increase HS1
25 Return Flow Temperature Increase HS2
26
Return Flow Temperature Increase Via
Buffer Storage