Automatic Heating Modulex E8, Инструкция по эксплуатации и руководство пользователя

Страница: 29 / 70

MODULEX CONTROLLER OPERATION
27
3.7 MODULEX CONTROLLER INITIAL STARTUP
Initial startup of the Modulex Controller requires a number of one-time entries to be made in the
INSTALLATION Menu Flow Chart and Menu Listing shown in Figure 3-7 and Table 3-6 respectively.
Table 3-7. Proceed as follows:
1. Set the POWER rocker switch, located to the right of the Controller, to the ON (1) position.
2. Open the panel cover on the Controller. The LCD display will read INSTALLATION. All values in
this level must be entered, in sequence, without interruption. The initial entries required include:
Language, Time and Date as shown in the INSTALLATION Table which follows.
3. The first function that appears is Language. By default, the display should show ENGLISH. If
ENGLISH is not displayed, turn the Rotary Knob until ENGLISH appears.
4. Press the Program Key to store setting.
5. Next, TIME will be displayed. Enter the current time (minutes, hours) using the Rotary Knob. Press
the Program key to store each value.
6. The next items displayed are the YEAR, MONTH and DAY. Enter each item using the Rotary
Knob and press the Program Key as previously described to store the entry.
7. Following entry of all Language, Time and Date entries, continue entering the remaining items
shown in Figure 3-7 and Table 3-6 until all required items have been entered. Use the Program
Key and Rotary Knob to select, adjust and store all entries as previously described.
8. Continue step 7 until RETURN appears in the display, indicating that you are at the end of the
INSTALLATION menu.
9. Press the Program Key to exit the INSTALLATION menu.
NOTE
All items in the following INSTALLATION Menu must be entered in
sequence. Press the Program Key to step through the menu functions.
Use the Rotary Knob to adjust/change entries. Press the Program Key to
store entries and sequence to the next menu item.