equipment det
ails
116
equipment det
ails
117
control panel – functions and symbols
(APPLIES To ConTRoL PAnELS WITH
PRoGRAM VERSIon 38 (06-17) oR LATER,
SEE ITEM 17)
0. The standby and on-position of the
control panel
In standby, the functions which are activated
in the boiler are shown, and there is no
background lighting in the display. The control
panel automatically goes to standby from the
on position after two minutes if no buttons
are pushed or if you step to standby (left of
On/Off) with the arrow keys.
Start the on position by pressing any button.
The background lighting comes on (blue light)
and a function that can be set flashes. Select a
function that can be set with the arrow keys.
The settings are automatically saved.
1. The control panel is on standby and the
heater is switched off.
2. The control panel is on standby and the
heater is operating.
1. RESETTInG THE SYSTEM
1. Press the Store/Reset button for 10
seconds. The control panel is reset to the
factory setting.
2. The main breaker to the control panel is in
the “Off” position, Gas is on, Electricity at
1kW and 22°C.
The pump is in automatic position. The lower
menu row is not lit up.
2. START THE HEATER
Start the heating in the caravan with the
settings last used.
If you break the power to the heater, the
settings which were last used will automatically
be used when the power comes back on.
1. Press the button with the arrow until “Off”
(main breaker) in the display flashes.
2. Press the +/On button. “On” (main
breaker) in the display flashes.
3. The settings are ready. “On” (main
breaker) is shown in the display when the
panel returns to standby.
3. SWITCH off THE HEATER
1. Press the button with the arrow until “On”
(main breaker) in the display flashes.
2. Press the -/Off button. “Off” (main
breaker) in the display flashes.
3. The settings are ready. “Off” (main
breaker) is shown in the display when the
panel returns to standby.
4. SET THE TEMPERATURE
YoU WAnT In THE VEHICLE
The temperature of the vehicle can be set from
+5°C to +30°C at intervals of 0.5°C.
1. Press the button with the arrow until the
symbol for selecting temperature flashes.
The temperature shown is the temperature
which is set at present (in this case
22.0°C).
2. Increase the temperature by pressing the
+/On button. Lower the temperature by
pressing the -/Off button. The diagram
shows that we have set the temperature at
25.0°C.
3. The settings are complete and the boiler is
working at the set temperature.
5. WARM WATER
If you need more warm water you can increase
the quantity temporarily for 30 minutes by
increasing the water temperature from 50°C
to 65°C.
When 30 minutes have elapsed, the water
temperature returns to 50°C and the symbol
goes out. When you have selected more warm
water, the circulation pump stops.
1. Press the button with the arrow until the
symbol for selecting warm water flashes.
The “OFF” text is shown next to the
temperature on the display.
2. Switch the warm water on by pressing the
+/ON button. The “ON” text is shown next
to the temperature on the display.
3. The warm water symbol is displayed when
the panel returns to standby.
