AutoCrib RoboCrib 2000 E, Руководство по эксплуатации

Страница: 35 / 53

Technical Specifications
35 | P a g e
RoboCrib Technical Specifications
RoboCrib External Parts
- Frame
o
A 2” steel tube frame supports a chain drive system, which actuates 12 individual platters.
o
The frame is 62” wide, 62” deep, and 83” high (including wheels).
- Wheels
o
Omni-Directional
o
Non-Locking
o
Leveling footpads are included with the shipment of the RoboCrib if using the wheels is not preferred.
- Walls
o
Made from 16Ga steel
o
Sit in a channel, lock together with interlocking tabs, and attach to the frame by pin-in-hex tamper-
resistant screws.
o
Types of Walls:

Right Front and Left Rear corner panels (2 each)

Right Rear and Left Front corner panels (2 each)

Back Panels (2 each)

Front Bin Door Panel (1 each)

Vertical Z Channel (2 upright rack mount rails) which holds the:

Control Panel

Touch screen Assembly
RoboCrib Platters
- Main Platter (MP)
o
Large Center Platter
o
4‟ 8” diameter
o
Driven by the main platter motor and chain
- Large Sub Platter (LSP)
o
Three platters each with 3 small sub platters
o
1‟ 8” diameter
o
The LSP motor and chain drive the 3 large sub platters and the 01X, 02X, and 03X small sub platters.
o
The LSP chain is also called the
“serpentine” chain.
- Small Sub Platters (SSP)
o
Nine 10” diameter sprockets
o
Located on the three large sub platters