Installation
16 |
P a g e
STEP 3
– Complete RoboCrib Setup
-
Exit from the RoboCrib software on the RoboCrib.
o
Click on the AutoCrib icon in the upper left hand corner.
o
Insert Username: Rumen
o
Insert Password: Rumen
-
Verify the RoboCrib computer is viewing correct data.
o
Start the AutoCrib software by double clicking the
shortcut available on the desktop.
o
Login to the AutoCrib software using „admin‟ as the
username with no password.
o
Navigate to Tools > Options > Locations.
o
Verify the following:
Server: Management Station pc Name\autocrib53
(i.e. mgmtstation\autocrib53)
OR
Management Station IP Address\autocrib53
(i.e. 192.168.168.24\autocrib53)
Database Name: autocrib53
Username: sa
Password: AutoCrib2005 (This password will be
encrypted.)
o
If the RoboCrib is not viewing the correct database, select
“Edit” and enter the correct server name, database name,
username, and password. Then, select “OK”.
-
Exit the AutoCrib software.
-
Start the RoboCrib software by double clicking on the shortcut
available on the desktop.
-
Once the RoboCrib software has started, allow the machine to
calibrate.
Содержание RoboCrib 2000 E
Страница 51: ...Appendix 51 P a g e ...
Страница 52: ...Appendix 52 P a g e ...
