Rev. 4.0 13ELE2000 Page 5 /14
Sa
te
llite
Na
vig
atio
n
SD card
A dedicated slot houses the SD card containing navigation
(map) software. The slot is located at the bottom of the
motorised front panel. The slot can be accessed by
putting the front panel on a horizontal position. SD card is
inserted “gold contacts” side facing up. Ensure the card is
fully inserted.
Setting up
To start the navigation software the user would call up
the “root” selection manual (see previous “root” section),
then tap the “Navigation” icon. In the case the software is
changed or that the software is run on the headunit the
first time, the user will need to perform an initial setup –
specify the “path” on the SD card where the map
software file is located – select voice language – select
display language – read and accept user agreement. To do
this, follow the steps on-screen.
GPS antenna
Users are supplied with latest map software, this is pre-
loaded on. The GPS antenna is usually installed in a
concealed (not visible) location on the vehicle. To ensure
best reception, the antenna must not be shielded by
metal, and it must also face correctly – facing up to
receive satellite signal over-head. If used for the first time,
the user may wish to use the auto identification feature
for the navigation system to register this GPS antenna
onto the system. This would need to be done only once
and is not needed during subsequent use.
Selecting destination
The unit is pre-loaded with Western European navigation
mapping. To specify destination, select destinate country,
then city, street and house number. Certain countries, for
example UK, postcode can be entered directly into the
“city” field. When using UK postcode, do not forget to
insert a space to separate the two groups of digits.
When an exact address is found, the surrounding map will
be displayed. Tap the chequer flag icon near the top-right
of the screen to start navigating to this address.
An example navigation screen is shown at the bottom of
the picture sequence. Various screen areas can be tapped
to access different functions that are related to that pane.
The user may also “drag” the map to see more. Zoom and
pan functions are also available on screen.
Audio while navigating
When in navigation, the user can select an audio source
by
short pressing
the “SRC/NAV” button on the front
panel. This will cycle through the available sources. When
the desirable source is being played through the
loudspeakers,
press and hold
down this same button and
notice that the map is displayed. Now we are listening to
our preferred source whilst navigating.
SD card slot for navigation
map software
scroll
down to
see the
icons
Finish reading the EULA and tap
“Accept” to start the map.
(1)
Clear this
checkbox
(2) Tap “Autodetect” to register GPS
antenna automatically.
