Home
Returns you to the home screen.
Left Arrow
Switches between the water and power levels screen.
Right Arrow
Switches between the water and power levels screen.
Power Levels Screen
The power levels screen
shows the voltage of leisure and vehicle batteries, the current of
on the active battery, the mains current draw and the solar current.
The active battery
is selected on the power settings screen (p13). The active battery
current shows if the battery is being charged or discharged. On the screen shown above
the battery is being charged as the current is on the positive scale. If the battery was being
discharged the current would be shown on the negative scale.
Power and water levels can be monitored from the power and water level menu
screens. The lower navigation arrows can be used to easily switch between water and
power level menu screens. Pressing the home button will return you back to the main
control panel.
The fresh water level is shown on the left of the screen, whilst the waste water level is
shown on the right. Please Note: that the levels on the screen will update more frequently
if the pumps are switched on.
An audible warning will sound for up to 60 seconds and a warning message will display
on screen, if the fresh water level falls below 25% or if the waste is full. Pressing the ok
button on the warning message will snooze the warning until power is switched off and
back on again. The water level warnings can be disabled on the screen settings screen,
see page 14 for details
Water Levels Screen
Power and Water Level Monitoring
Monitoring Power
and Water Levels
10
Harmony - Monitoring Power/Water Levels
Harmony - Monitoring Power/Water Levels
11
www.auto-sleepers.co.uk/harmony
