Auto-Sleeper Harmony Скачать руководство пользователя

Страница: 28 / 33

Important Reference Information

Important technical information for your Truma CP Plus control panel can be found here.

Technical Data

Technical Information

Maintenance

Disposal

Harmony - Technical Information

www.auto-sleepers.co.uk/harmony

Display

LCD, monochrome, with background lighting

Dimensions (L x W x H)

92 x 103 x 40 mm

Operating temperature range

-25 °C to +60 °C

Storage temperature range

-25 °C to +70 °C

Interfaces
CP plus

TIN-Bus

CP plus CI-BUS TIN-Bus, CI-BUS

TIN-Bus, CI-BUS

Power supply

8 V – 16.5 V

Power consumption

max. 65 mA (100 % background lighting)

6.5 mA – 10 mA (Stand-by)

Standby current

3 mA (Off)

Weight

approx. 100g

The Truma CP plus control panel is maintenance-free. In order to clean the front panel,

use a damp, non-scouring cloth. If this is not sufficient, use a neutral soap solution.

The Truma CP plus control panel must be disposed of in accordance with the

administrative regulations of the respective country in which it is used. National

regulations and laws (in Germany, for example, the End-of-life Vehicle Regulation)

must be observed.

Subject to technical changes.

Содержание Harmony


































Результаты поиска

Содержание Harmony

Отзывы:

Похожие инструкции для Harmony

Бренды по названию

Популярные бренды

Auto-Sleeper Harmony, Руководство пользователя

Результаты поиска

Содержание Harmony

Отзывы:

Похожие инструкции для Harmony

Бренды по названию

Популярные бренды