Harmony User Guide - Introduction
031
Set-points and parameters can be selected, modified and saved by tapping on it using
the rotary push button (8). Selected menu items flash.
Rotate clockwise
•
Menu is run through
from left to right.
•
Increase values (+).
Rotate anticlockwise
•
Menu is run through
from right to left.
•
Decrease values (-).
Pressing the Back button (9) returns you from a menu and discards settings. This means
that the previous values are retained.
Rotary push button
Back button
The menus can be selected in lines (3 + 4) and settings can be made using the rotary push
button (8). The display (1) has an illuminated background. The Back button (9) can be used
to return from a menu.
Display and control elements
1 = Display
2 = Status bar
3 = Menu bar (upper)
4 = Menu bar (lower)
5 = 230 V mains supply
indicator (power)
6 = Time switch display
7 = Settings / Values
8 = Rotary push button
9 = Back button
The Digital Display
Tapping
•
Accept (save) a
selected value.
•
Select a menu item,
switch to setting level.
Long press
•
Main switch function ON / OFF.
•
If a iNet Box was recognised while
searching for an appliance, the function
of the rotary push button changes
(see “APP mode in conjunction with an iNet
Box” on page 33).
Initial start-up
Start-up
In order to perform the initial start-up, the following steps are required:
•
Switch on power supply. 12V direct voltage for CP plus control panel and Combi and 230V
mains voltage for air conditioning systems and Combi E.
•
Start the search of the appliances under menu item “Service menu” –> “RESET” –> “PR SET”.
After connecting the Truma CP plus
control panel to the power supply,
a start screen is displayed after a
few seconds.
Note:
•
The display changes between the time and the
set room temperature.
•
Special displays on command via Truma App,
IR remote control of the air conditioning system
or CI-BUS (see “Special displays” on page 51).
•
After a repair / retrofit, the procedure
described under “Initial start-up” must be
repeated.
Note:
The initial start-up will
have been undertaken prior to
motorhome delivery
30
Harmony - The Digital Display
Harmony - The Digital Display
31
www.auto-sleepers.co.uk/harmony
After confirmation, Truma CP plus control panel initialises
itself. “INIT ..” appears on the display while this is in
progress. This stores in the Truma CP plus control panel
the appliances that have been found.
