131
To perform setting for live data record
1. Tap the
Setting
functional button at the bottom of the Live Data
screen.
2. Tap the
Record
navigation button.
3. Tap the
button on the right of
Trigger Type
bar and select the
required trigger mode.
4. Tap the
button on the right of
Duration
bar and select a length
of time.
5. Tap the
button on the right of
Trigger Point
bar and select a
relative percentage of a record length to be reserved before the data
recording start point.
6. Tap
Done
to save the setting and return to the Live Data screen; or
tap
Cancel
to cancel without saving and exit Setting.
Done Button
– confirms and saves the setting, and returns to the Live
Data screen.
Cancel Button
– cancels the setting operation, and returns to the Live
Data screen.
Active Test
The Active Test function is used to access vehicle-specific subsystem and
component tests. Available test vary by vehicle manufacturer, year, and
model, and only the available tests display in the menu.
During an active test, the tester outputs commands to the ECU in order to
drive the actuators. This test determines the integrity of the system or parts
by reading the engine ECU data, or by monitoring the operation of the
actuators, such as switching a solenoid, relay, or switch, between two
operating states.
Selecting Active Test opens a menu of test options that varies by vehicle
make and model. Selecting a menu option activates the test. Follow all screen
instructions while performing tests. How and what information is presented
on the screen varies according to the type of test being performed. Some
toggle and variable control tests display Active Test Controls at the top of the
screen with data stream information below, or vice versa.
