129
NOTE
In this mode, Graph Merge can only display up to three parameter items.
To cancel Graph Merge mode, tap the drop-down button on the right side
of the parameter name, and select a data display mode.
Show
– taps this option to switch between the two options; one displays
the selected parameter items, the other displays all the available items.
Setting
– taps this button to access setting screen to set the trigger mode,
recording duration and threshold values for data recording, and define
other control settings.
Figure 6-6
Sample Setting Mode in Live Data
There are four navigation buttons on top of the
Setting
mode screen.
Selected Button
– displays the configuration screen on which you can
set the threshold values, an upper limit and a lower limit, for triggering
the buzzer alarm
.
This function is only applied to the Waveform Graph
display mode.
a)
MIN
– taps to open a virtual keyboard, allowing you to enter the
required lower limit value.
b)
MAX
– taps to open a virtual keyboard, allowing you to enter the
required upper limit value.
c)
Buzzer Alarm
– switches the alarm on and off.
