127
Tap the drop-down button on the right side of the parameter name to
open a sub menu. There are four buttons to configure the data display
mode, and a Help button for access to additional information.
Each parameter item displays the selected mode independently.
1) Analog Gauge Mode
– displays the parameters in form of an analog
meter graph.
2) Text Mode
– this is the default mode which displays the parameters
in texts and shows in list format.
NOTE
Status parameters, such as a switch reading, can primarily be viewed in text
form such as ON, OFF, ACTIVE, and ABORT. Whereas, value parameters,
such as a sensor reading, can be displayed in text mode and additional graph
modes.
3) Waveform Graph Mode
– displays the parameters in waveform
graphs.
When this mode is selected, three control buttons display on the right
side of the parameter item for manipulation of display status.
Text Button
– resumes Text Display Mode.
Scale Button
– changes the scale values that are displayed below
the waveform graph. There are four scales available: x1, x2, x4 and
x8.
Zoom-in Button
– tap once to display the selected data graph in full
screen.
Edit Button
– tap this button to open an edit window, on which
you can set the waveform color and the line thickness displayed
for the selected parameter item.
Scale Button - changes the scale values, which are displayed
below the waveform graph. There are four scales available: x1,
x2, x4 and x8.
Zoom-out Button
– exits full screen display.
4) Digital Gauge Mode
– displays the parameters in form of a digital
gauge graph.
Full Screen Display
– this option is only available in the waveform graph
mode, and primarily used in Graph Merge status for data comparison.
