AUSA C 400 H, Руководство оператора

Страница: 87 / 118

Drain the water from the fuel filter (fig. 1)
The fuel used may contain water which is deposited on the lower part of the filter element.
To protect the fuel injection system it is essential to drain the water from the filter element
regularly as shown in the
MAINTENANCE CHART .
- Unscrew the drainage cap (a) located on the lower part of the filter element.
- Wait until all the water in the filter has drained off.
- Tighten the drainage cap
(a) .
Dispose of remains of fuel in authorized centres.
WARNING
Take care to correctly tighten the drainage cap. If it is loose, unwanted air may
enter the injection system and cause the engine to operate incorrectly.
 Tilting the mast while the engine is stopped (emergency movement)
It is possible to tilt the mast of the forklift (emergency movement) forwards with the
ignition off. To do so, proceed as follows:
- Locate the emergency movement connector under the dash panel, next to the
steering column (fig. 2) .
- Remove the protective cover from the connector by lifting the locking tab and
moving it forwards.
- With the help of an external battery supply the connector with + 12V DC and
earth ( - ) as follows:
Connector, contact 1: + 12V DC
Connector, contact 2: earth (-)
- Push the joystick (fig. 3) to the right in order to tilt the mast.
Note: To help this movement, we recommend applying a small load on the end of the
forks.
(fig. 3)
(fig. 2)
(fig. 1)
a
C 400 H / C 400 HI / C 400 H x4 / C 400 HI x4
C 500 H / C 500 HI / C 500 H x4 / C 500 HI x4
85
Periodic
Maintenance
Operations