AUSA C 400 H, Руководство оператора

Страница: 82 / 118

 Engine
For operating instructions, list of spare parts and general maintenance, see the engine
User’s Manual or the
MAINTENANCE CHART .

Alternator belt
Check the tension of the alternator belt regularly. Also check for cracks or other damage.
Refer to an authorized AUSA dealer for the replacement of the alternator belt.

Engine oil
Oil level: Checking
With the forklift on a level surface, while the engine is cold and switched off, check the
oil level as follows:
- Pull out the dipstick and clean it with a clean cloth.
- Set the dipstick into its casing.
- Remove again and check the oil level. This should be at the upper level (fig.1) .
a- Full
b- Add oil
c- Operating range
- Add oil until the level reaches the upper level.
Oil level: Correct
- Remove the dipstick and place a funnel in the opening of the oil filler neck located
above the rocker arm cover.
CAUTION
Do not exceed the maximum level mark. Starting the engine with incorrect oil
levels may cause serious damage. Clean up any spillage. Check the oil level
often and top up where necessary.
- Top up with oil gradually until the level is correct.
C 400 H / C 400 HI / C 400 H x4 / C 400 HI x4
C 500 H / C 500 HI / C 500 H x4 / C 500 HI x4
80
(fig. 1)
Periodic
Maintenance
Operations