AUSA C 400 H, Руководство оператора

Страница: 70 / 118

 Starter:
WARNING
For reasons of safety, the operator should be seated, the seatbelt fastened,
and the parking brake applied.
Starting engine when the operator is seated:
The direction of travel control switch should be in neutral or the parking brake switch is
on.
Starting engine when the operator is not seated:
The direction of travel control switch or the parking brake switch can be in any position.
- Place the key in the ignition switch and turn to position (b) ignition. Wait a few
moments until the engine preheating light goes out.
- Press the accelerator pedal 1/4 of the way and turn the key to position (c) to start
the engine. Do not hold the key in this position for more than 15 seconds.
- If the engine does not start, repeat the above steps and wait 30 seconds between
each attempt. Before re starting the engine, the key should first be switched to
position
(a) .

Checks
With the engine running and the forklift at idle, carry out the following checks and tests.
- Check the instrument panel controls.
- Check the steering by turning it gently to the left and right.
- Lift the forks off the ground 6 in (150 mm).
- Check the parking brake.
- Check that the brake pedal action is firm.
C 400 H / C 400 HI / C 400 H x4 / C 400 HI x4
C 500 H / C 500 HI / C 500 H x4 / C 500 HI x4
68
(fig. 1)
a
b
c
Operating the
forklift