AUSA C 400 H, Руководство оператора

Страница: 80 / 118

- To prevent the falling down of the cabin during carrying out maintenance
operations it should be secured using the safety lock (fig. 1, 2) . This will prevent
it from lowering and causing accident.
REMARK
Whenever the cabin is raised, the safety lock must be on. This prevents the
cabin from causing an accident on descending.
To access the upper part of the engine, after raising and securing the operator cabin, lift
the inspection cover
(fig. 3)(a) by pulling on the lock (fig. 3)(b) .
To access the sides of the engine, undo the bolt (fig. 4)(c) and nut (fig. 4)(d) and
remove the rear wheel cover. There is a wheel cover on each side of the machine.

Daily checks
- Before starting to work with the forklift, clean any oil or fuel spills, clean and
remove grease from hands and the soles of shoes and do not forget to make the
following checks:
- Condition of the lifting chains
- Tyre pressure and condition of the tread.
- Brakes.
- Leaks in the hydraulic, coolant, fuel circuits, etc.
- Check the correct position and fastening of all the guards, caps and safety stops.
- Absence of cracks or other structural defects visible at first glance.
C 400 H / C 400 HI / C 400 H x4 / C 400 HI x4
C 500 H / C 500 HI / C 500 H x4 / C 500 HI x4
78
(fig. 4)
(fig. 3)
(fig. 2)
(fig. 1)
a
b
c
d
Periodic
Maintenance
Operations