AUSA C 400 H, Руководство оператора

Страница: 66 / 118

Multi-function instrument (fig. 1)
A- Hourmeter. This gauge indicates the total running time of the forklift engine to
enable servicing of the engine at proper intervals. (See the section MAINTENANCE
CHART for servicing frequency).
B- Fuel level. This gauge indicates the diesel fuel level in the tank.
C- Fuel reserve warning lamp. This lights up when the level of diesel in the tank
falls into reserve.
D- Air filter warning lamp. When the air filter of the diesel engine becomes clogged
with dirt, this lamp will light. The air filter should be immediately cleaned or serviced.
The filter element should be cleaned or replaced immediately.
E- Preheating warning lamp. When this lamp glows it indicates that the engine
pre-heat plugs are in operation and heating the combustion chamber to the
temperature required in order to start the engine.
F- Hydraulic oil level warning lamp. This lights up and emits an audible warning
when the hydraulic oil level is at the minimum level. Oil should be added to top up
the level to the correct level.
G- Engine oil pressure warning lamp. When the ignition is on, this lamp lit and
turns off when the engine is running. If this lamp turns on and a warning signal is
emitted while the engine is running, the engine must be stopped immediately to
prevent damages. Check the level and add oil if necessary.
(fig. 1)
C 400 H / C 400 HI / C 400 H x4 / C 400 HI x4
C 500 H / C 500 HI / C 500 H x4 / C 500 HI x4
64
Controls
Instruments
Equipments