Aumuller FVM2, Инструкции по сборке и пусконаладке

Страница: 14 / 32

14
Assembly Instruction
FVM2
Accessories for locking drive
Assembly and Commissioning
Instructions
Warning sign sticker
„Risk of entrapment“ (1x)
04
Tools required
• Marker,
• Grains,
• Hammer,
• Knife,
• Screwdriver
(cross, Torx),
• Hexagonal wrench,
• Torque wrench,
• Power drill,
• Threadlock adhesive,
• possibly a tool for blind rivet nuts.
Scope of delivery:
Prior to assembly, check items quantity in the delivery for
completeness.
Check window data on site
• Measure FAB and FAH.
• Check / calculate weight of casement.
If unknown, it can be determined approximately with
the following formula:
• Check / calculate the required drive force and compare
with drive data . If unknown, it can be determined
approximately with the following formula:
a = Distance of action point to hinges
F = Drive force
s = Stroke
weight) [kg] [m] [m] [mm] frame
share glass-
density
G (Casement = FAB
*
FAH
*
Glass thickness
*
2,5
*
1,1
F [N] =
Facade Roof
F [N] =
5,4
*
G [kg]
*
s [m] 5,4
*
G [kg]
*
FAH [m]
a [m] a [m]
I
NSTALLATION STEP
2: I
NSTALLATION PREREQUISITE AND
I
NSTALLATION PREPARATION
The following conditions must be fulfi lled for the instal-
lation of the drives so they can be properly assembled with
other parts and constructed to a complete machine at the
window without impairing the safety and health of persons:
1. The design of the drive must fulfi ll the requirements.
2.
The fastening accessories (casement brackets or
frame brackets) must fi t the window profi le; the
profi le-dependent hole lay-out must be complied with.
3. The space required for the installation of the drive on
the frame and casement profi le must be suffi cient.
4. The window must be in perfect mechanical condition
before the installation. It should open and close easily.
5. The fastening material for the installation of the drive
must fi t the window material (see table).
P
REPARING ASSEMBLY
04
a
a
a
G
G
s
s
s
FAH
G
F
F
F
FAH
FAH
W
ood windows
Wood screws:
i.e. DIN 96, DIN 7996, DIN 571
round head with slot,
round head with cross,
hex head,special type
steel,
stainless steel,
aluminum windows
Self-tapping screws, thread screws,
sheet-metal screws
i.e. ISO 4762, ISO 4017, ISO 7049 , ISO 7085, DIN 7500
cylinder head with hex socket, internal serration (Torx),
Phillips head or external hex head
blind rivet nut
plastic windows
Screws for plastic
i.e. DIN 95606, DIN 95607, ISO 7049,
ISO 7085, DIN 7500
round head with cross, external hex head,
Torx
Recommendation:
if possible
, screw
through two cavity
webs