Aumuller FVM2, Инструкции по сборке и пусконаладке

Страница: 20 / 32

20
Assembly Instruction
FVM2
06
Assembly locking drive FVM2

Mount the locking drive FVM2 - as described below:

Determine fastenings.

Produce drill holes with appropriate cross-section.
For concealed mounting inside profi les produce
the milling layouts. Please refer to the above-mentioned
hole layout drawings and mill layouts drawings
(see chapter „I
NSTALLATION STEP
3“ or project-specifi c
documents and drawings).
Carefully clear away drilling swarfs to prevent
seals from being damaged.
Avoid surface scratches, for example by using
masking tape.
!
A
SSEMBLY WITH
M-COM

Mount the locking drive FVM2 with screws

and
washers

in the pre-cut window frame.

Secure fasteners against loosening; i. e. by applying
removable thread-locking compound such as “Loctite”.

Switch on the control voltage at locking drive FVM2
- in CLOSE direction.

Check whether the traverse path of the locking drive
FVM2 with the traverse path of the on-site locking bar
moves synchronously.
If necessary, correct the locking stroke and the locking
position - with the DIP switches.

Move locking drive FVM2 in OPEN direction.

Switch off the control voltage from the locking
drive FVM2 .
Installing M-COM in a voltage-free state.
The confi guration is always in CLOSE direc-
tion.
!

Switch on the control voltage at locking drive FVM2
and at opening drive - in CLOSE direction.

M-COM is confi gured (see LED display).

Check sequence control.

Ensure the easy movement of the casement.
Installation: M-COM

Installing the M-COM (see separate „Installation
Instructions“ for M-COM).

Hinge opening drive on casement.

Make mechanical settings in accordance with „Assem-
bly and Commissioning Instructions“ of the drives.
Sequence control:
24V DC
M
24V DC
M
Open
Locking drive
Opening
drive
Close
Locking drive
Opening
drive
FVM2
FVM2
opening drive
is unhinged
4
5
FVM2
RA
Test run: locking drive FVM2

Close the casement manually. During the test run
press the casement fi xed to the frame.

Switch on the control voltage at locking drive FVM2
- in CLOSE direction.

Switch the control voltage - from the locking drive FVM2 -
in OPEN direction.

Ensure the easy movement of the casement.

Open the casement manually.

Switch off the control voltage from the locking
drive FVM2 .