Auerswald COMmander Basic.2, Инструкции по установке и вводу в эксплуатацию

Страница: 72 / 84

Service and Maintenance
72
Note: If the "Power” LED remains constantly lit even
after a restart, an error has occurred. Please contact
your dealer or the manufacturer directly.
Note: The LEDs are easily visible on the front panel
of the 19" casing variants.
Important: When a COMmander 8VoIP/16VoIP
module is added, the LEDs “LAN link” and “LAN
activity” no longer have a function.
LED Functions on the S
0
Modules
LED Functions on the U
P0
Module
“LAN” LED Transfer activity on the Ethernet interface
Orange (blinks/
flickers) Packets are being transmitted.
Off No transfer activity.
“LAN Link” LED Status of the Ethernet interface
Green An Ethernet connection to a computer/
network exists.
Off No Ethernet connection to a computer/
network exists.
Fig. 56: LEDs
LAN link
LAN activity
Status
Fig. 57: “Power” LED
Power
LED Status of the associated S
0
ports
Flickers A B-channel is in use.
Lights up Both B-channels are in use.
Lights up briefly D-channel message has been received/sent.
Flashes with 0.5 Hz Layer 1 is activated.
Fig. 58: LED S
0
modules
S
0
port 1 S
0
port 3 S
0
port 2 S
0
port 4
LED Status of the corresponding U
P0
port
Flickers A B-channel is in use.
Lights up Both B-channels are in use.
Lights up briefly D-channel message has been received/sent.
Flashes with 0.5 Hz Layer 1 is activated.
Blinking The port is overloaded (e.g., short-circuit
fault).
Fig. 59: LEDs