543
COMfortel 1400 IP/2600 IP/3600 IP - Firmware V2.6 - Operation/Configuration - V05 09/2016
Settings
Network
To run a VLAN, you require VLAN-enabled network components that
comply with the IEEE 802.1Q standard.
Requirements:
•
VLAN provided on the network
•
Set up network interface type VLAN (can be configured in the telephone
under
> Settings > Provider & PBXs > Name of provider/PBX >
Network interface type
)
VLAN is enabled and additional entries must be made:
VLAN ID internal port (1...4094)
Enter the internal VLAN ID port.
VLAN priority internal port (0...7)
Enter VLAN priority of the internal port (
0
(lowest priority) to
7
(highest
priority).
VLAN gateway
Requirements:
•
Enabled VLAN
Important:
Assign different values to the VLAN-ID internal port and the
VLAN-ID external port.
The external port is placed in a separate VLAN.
All data packages are forwarded to the external port.
The following entries must also be made:
VLAN ID external port (1...4094)