auer 132616, Руководство по установке

Страница: 22 / 32

-
installer
GIALIX 24 MA C -BC
manual
-
22
3.7.2.2 - Pairing of stages
To prevent the unbalancing of phases when the boiler is
regulating, it is possible to pair the stages numbered 1 ;2 and 4 ; 6
(Set parameter n°
15
to
1
).
3.7.2.3 - Programming the boiler for
maximum power
The boiler is delivered for operation at its maximum power level
of 24kW (parameter
16
=
1
).
• Set parameter
16
=
0
.
• Set parameters
17
to
22
to the value defined in the table below
to set the maximum power of the boiler:
To allow power supply to the boiler and
cables and smaller sized fuses (see §
«Sizing of fuses»), it is mandatory to permanently
lower the boiler’s power by disconnecting the
heating elements (see § «Lowering of the boiler’s
power by disconnecting the heating elements»).
3.7.3 - Heating curve
The automatic adjustment of the boiler’s set temperature based
on the exterior temperature is only possible with the included
exterior sensor.
The heating curve, is built on the following 4 parameters (see §
«Setting the regulator»):
•
TCMA
= Maximum boiler temperature
•
TCMI
= Minimum boiler temperature
•
TEMA
= Maximum exterior temperature
or summer/winter changeover temperature
•
TEMI
= Minimum exterior temperature
or base exterior temperature
3.7.3.1 - Underfloor heating application
The boiler is delivered from the factory with a 100°C safety
aquastat; for use with the 60°C safety aquastat (see § «Settings for
a low temperature application»).
Example:
TC (°C )
10
20
30
40
50
60
70
80
-30 -25 -20 -15 -10 -5 0 5 10 15 20 25
Text (°C )
Set temperature at boiler outlet
Exterior temperature
3.7.3.2 - Radiator application
3.7.3.3 - Heating curve of the installation
Factory set with a 100°C safety aquastat.
Example:
Stage number
1 2 3 4 5 6
Power level of stage (kW)
5.3 2.7 5.3 2.7 5.3 2.7
Parameter n
o
17 18 19 20 21 22
Value of
parameter to set
the maximum
desired power
level
(no =
0;
yes =
1
)
24 kW
1 1 1 1 1 1
21.3 kW 1 0 1 1 1 1
18.6 kW 1 1 0 1 1 1
16 kW
1 1 0 0 1 1