18
1
System Connector
Connector for the MATCH cable harness.
Make sure that you only use the original ca-
ble that comes with the amplifier to connect
the M 5DSP MK2 with your car radio.
2
Auto Remote
This switch allows to activate / deactivate the
automatic turn-on feature of the amplifier.
3
Line Out
Stereo pre-amp output for connecting ex-
ternal amplifiers. Make sure that the remote
output (
Remote Out
) is used to turn on these
devices.
4
Subwoofer Output
Connector for a passive subwoofer or center
speaker. Use only the enclosed subwoofer
cable for connection.
5
USB Input (slave only)
Connects the M 5DSP MK2 to your PC.
6
Control pushbutton
Use this button to either switch between the
setups or initiate a reset of the device.
7
Remote In / Out
The remote input can be used to switch on
the M 5DSP MK2. The remote output has to
be used to switch on external amplifiers that
are connected to the
Line Out
of the amplifier.
8
Status LED
This LED indicates the operating mode of the
amplifier and which setup has been chosen.
9
Optical Input
Optical input for digital stereo signals (SPDIF
format).
10
Control Input
Multifunction interface for e.g. an optional re-
mote control or other MATCH M 5DSP MK2
accessory.
Connectors and control units
1
2
3
9
10
8
7
6
5
4
