audioscan Verifit VF-1 Скачать руководство пользователя страница 113

Страница: 113 / 125

0611

Verifit User’s Guide Version 2.8

Page 113

Seewald, R.C. (1994a). Current issues in hearing aid fitting. In J-P Gagne and N. Tye-Murray (Eds.),

Research in Audiological Rehabilitation: Current Trends and Future Directions.

Journal of the

Academy of Rehabilitative Audiology Monograph, XXVII.

Seewald, R.C. (1994b). Fitting children with the DSL method.

The Hearing Journal, 47(

9), 10,48-51.

Seewald, R.C., Moodie, K.S., Sinclair, S.T. & Cornelisse, L.E. (1996). Traditional and theoretical

approaches to selecting amplification for infants and young children. In Bess, F.H., Gravel, J.S. &
Tharpe, A.M. (eds.):

Amplification for Children with Auditory Deficits,

Nashville: Bill Wilkerson Center

Press, 161-191.

Seewald, R.C. & Ross, M. (1988). Amplification for young hearing-impaired children. In M.C. Pollack

(Ed.),

Amplification for the Hearing-Impaired

, Third Edition (pp. 213-271). Orlando: Grune & Stratton.

Seewald, R.C., Ross, M. & Spiro, M.K. (1985). Selecting amplification characteristics for young hearing-

impaired children.

Ear and Hearing, 6

(1), 48-53.

Seewald, R.C., Ross, M. & Stelmachowicz, P.G. (1987). Selecting and verifying hearing aid performance

characteristics for young children.

Journal of the Academy of Rehabilitative Audiology

, 20, 25-38.

Seewald, R., Moodie, S. T., Scollie, S. & Bagatto, M. (2005).

The DSL method for pediatric hearing

instrument fitting: Historical perspective and current issues

. Trends in Amplification, 9-4, 145-157.

Seewald, R.C. & Moodie, K.S. (1992). Electroacoustic considerations. In M. Ross (ed),

FM Auditory

Training Systems: Characteristics, Selection, & Use

. Timonium, MD: York Press.

Sherbecoe, R.L & Studebaker, G.A. (2003) Audibility-Index predictions of normal-hearing and hearing-

impaired listeners’ performance on the Connected Speech Test. Ear and Hearing, 24-1, 71-88.

Sinclair, S.T., Moodie, K.S. & Seewald, R.C. (1997). Pediatric Hearing Instrument Fitting:

Phonak Video

Focus #2 Booklet

, Stofa, Switzerland: Phonak A/G.

Sinclair, S.T. Seewald, R.C. & Cole, W.A. (1996). A new real-ear fitting system: Because no two ears are

alike.

Hearing Review 3

(6):46-48.

Skinner, M. W. (1988).

Hearing Aid Evaluation

. Englewood Cliffs: Prentice-Hall Inc.

Smith, D. A. 1990. Technological report: Acoustometry.

Hearing Instruments 41

(11):40-44.

Valente, M., Potts, L.G., Valente, M., Vass, W & Goebel, J. (1994). Intersubject Variability of real-ear

sound pressure level: Conventional and insert earphones.

Journal of the American Academy of

Audiology, 5

, 390-398.

Valente, M:

Strategies for Selecting and Verifying Hearing Aid Fittings

. New York:Thieme Medical

Publishers, Inc.,1994.

Zelisko, D.L.C., Seewald, R.C. & Whiteside, S. (1992). Comparing three procedures for predicting the ear

canal SPL at LDL.

ASHA, 34

(10).

Содержание Verifit VF-1






























































































































Результаты поиска

Содержание Verifit VF-1

Отзывы:

Бренды по названию

Популярные бренды

audioscan Verifit VF-1, Руководство пользователя

Результаты поиска

Содержание Verifit VF-1

Отзывы:

Бренды по названию

Популярные бренды