Audion Elektro D 555 NH, Руководство пользователя

Страница: 15 / 28

15
Fig. 9
8.6 Transport belt
The transport belt supports and transports the packing to be sealed. The transport belt prevents the packing
from hanging on the seal.
Make sure that:
−
The distance between the transport belt and the sealunit is correct. (half of the thickness of the
packing that is to be sealed.
−
The transport belt does not run against anything.
8.6.1 Adjust transport belt
Adjust the transport belt if:
−
the belt touches the sides.
−
the tension on the belt is too high or too low.
Note: Loosen the 4 locknuts (fig. 9 pos 1) before adjusting the tension.
Only adjust the tension when the belt is running slowly.
The tension can be adjusted by rotating the front or rear locknut (fig. 9
pos 1):
−
Clockwise tension belt.
−
Counter clockwise release belt.
If the transport belt touches one side of the frame;
−
Tension the belt on the side it is touching.
−
Release the belt on the other side.
If the transport belt has been incorrectly tensioned;
−
Tension the belt equally by adjusting both sides.