Audion Elektro D 555 NH, Руководство пользователя

Страница: 9 / 28

9
6.6 Preparation for use
After the All-in is connected to the power and properly checked. The machine can be put into operation.
−
Reset the emergency stop.
−
Set the main switch (POWER) to on (1).
−
Adjust the seal temperature (TEMP).
−
Adjust the operation speed (SPEED).
−
Turn on the MOTOR, FAN, and HEATER if necessary.
−
Press START/STOP to turn on the machine.
−
Let the machine heat up. The led TEMP/ACT stops flashing if the machine is at the set temperature.
Turn off the All-in normally with the cool run. If the All-in is not used for a longer period of time, set the main
switch (POWER) off and disconnect the power cord from the mains supply.
6.7 Emergency stop
In case of emergency the emergency stop (fig. 4) can be
activated. This causes the power supply to be shut off and the
machine to stop.
The emergency stop should only be used for emergencies and
not for a temporary switch off or stop of the machine.
The emergency stop is operated by means of pushing the red
button (fig. 4) on top of the machine. After each use of the
emergency stop it should be resetted by turning the red button in
the direction of the arrow.
After resetting the emergency stop, press the START/STOP-
button and the machine starts running again.
7 Specifications
7.1 Operational specifications
−
Operation speed : max. 10 meter per minute
−
Ambient temperature : +5ø . . . +40ø Celsius
−
Humidity : 30% . . . 95% rel. (without condensation)
−
Fastening, fixing : The ALL-IN-SEALER is standing on 4 rubber feet
−
Explosion safety : Not to be used in explosive surroundings
−
Extraction, ventilation : To be used in ventilated spaces
7.2 Applocations not allowed
−
Packing in medical, sterile environment.
−
Use in an explosive surrounding.
−
Packing of poisonous, corrosive, irritating substances.
−
Packing of explosive materials.
−
Packing of (dangerous) dusty products.
Fig. 4