AudioCodes MediaPack MP-40 series, Руководство пользователя

Страница: 99 / 180

User's Manual 6. Configuring the MediaPack
Version 2.2 99 July 2007
„
IP to Tel Source Number Manipulation Table for IP-to-Tel calls (refer to Section ' IP-to-
Tel Source Numbers ' on page 102 )
„
Tel to IP Source Number Manipulation Table for Tel-to-IP calls (refer to Section ' Tel-
to-IP Source Numbers ' on page 104 )
Note: Number manipulation can occur either before or after a routing decision is
made. For example, you can route a call to a specific ISDN interface
according to its original number, and then you can remove or add a prefix
to that number before it is routed. To configure whether number
manipulation is performed before or after call routing, use the 'Routing &
Manipulation' parameter in the SIP Proxy & Registration screen (described
in Section '
SIP Proxy & Registration Settings ' on page 82 .
Note: the actions strip leave add are executed in the following order: strip (prefix/suffix); leave; add
(prefix/suffix)
6.2.2.6 IP-to-Tel Destination Numbers
The IP to Tel Destination Number Manipulation table is used to change the destination
number received in IP-to-telephone incoming calls. The table is processed from top to
bottom, where the first matching rule is used to manipulate the number. Processing stops
after the first manipulation.
Note: For a description on the convention for entering telephone numbers in the
Manipulation tables, refer to Section '
Convention for Entering Phone
Numbers in Tables ' on page 66 .
¾
To configure IP-to-Tel destination numbers:
1. Open the IP to Tel Destination Number Manipulation Table ( Protocol Management
menu > Manipulation Tables submenu > IP
Æ
Tel Destination Numbers option).
Figure 6-10: IP to Tel Destination Number Manipulation Table
2. From the ‘Position' drop-down list, select the entry that you want to add.
3. Configure the number manipulation table according to Table 6-7 .
4. Click the Insert button to insert an entry at the specified position.
5. To save the changes to the flash memory, refer to Section ' Saving Configuration
Settings on the MediaPack ' on page 146 .
You can modify an entry by clicking the Modify button and delete an entry by clicking the
Remove button.