AudioCodes MediaPack MP-40 series, Руководство пользователя

Страница: 45 / 180

User's Manual 4. Initial Configuration
Version 2.2 45 July 2007
Note: Internet Explorer’s security settings may block access to the gateway’s
embedded Web server if they’re configured incorrectly. In such a scenario,
the following message is displayed:
"Unauthorized: Correct authorization is required for this area. Either your
browser does not perform authorization or your authorization has failed.
RomPager server."
To troubleshoot blocked access, perform the following:
1. Delete all cookies from the Temporary Internet files. If this does not
solve the problem, the security settings may need to be altered (refer
to Step 2).
2. In Internet Explorer, from the Tools menu, choose Internet Options ,
select the Security tab, and then select Custom Level . Scroll down
until the Logon options are displayed and change the setting to
Prompt for username and password and then restart the browser. This
fixes any issues related to domain use logon policy.
Tip: Record and retain the IP address and subnet mask you assign the
MediaPack. Do the same when defining new username or password.
4.1.2.2 Assigning an IP Address using CLI
The procedure below describes how to configure the MediaPack's networking parameters
using CLI. The CLI can be accessed through Telnet or an RS-232 connection. In our
example setup, the CLI is accessed through Telnet (for detailed information on accessing
the CLI through an RS-232 connection, refer to Section '
RS-232 Interface ' on page 68 ).
¾
To assign an IP address using CLI:
1. Access the MediaPack by using your PC to establish a Telnet connection to the
MediaPack's LAN IP address 192.168.2.1.
2. Log on to the system using the following login passwords:
Login: Admin
Password: Admin
3. Enter the configuration mode by typing the following commands:
enable <CR>
<IP address># configure <CR>