AudioCodes MediaPack MP-40 series, Руководство пользователя

Страница: 34 / 180

MediaPack BRI Series
User's Manual 34 Document #: LTRT-83702
3.4.4 Connecting the RS-232 Serial Interface
The RS-232 interface can be used for local configuration using Command Line Interface
(CLI). For a description on accessing the CLI using the RS-232 interface, refer to Section
'
RS-232 Interface ' on page 68.
¾
To connect the MediaPack's RS-232 interface, take the following
step:
„
Using a standard RS-232 straight cable (not a cross-over cable) with DB-9
connectors, connect the MediaPack's RS-232 port (labeled
RS232 ) to either the
COM1 or COM2 RS-232 communication port on your PC.
The required connector pinouts and gender are shown below in Figure 3-9 .
Figure 3-9: MediaPack RS-232 Connector Pinouts
3.4.5 Connecting the Lifeline Port
To implement the Lifeline feature, port S/T 0 must be configured as network port. When a
power outage occurs, the lifeline phone (connected to port S/T 0 ) can continue making
calls (although this time, through the PSTN network, not the WAN).
¾
To connect the Lifeline port:
1. On the MediaPack's rear panel, connect the ISDN telephone to S/T port (labeled S/T
O ).
2. On the MediaPack's rear panel, connect the PSTN network to the lifeline port (labeled
Lifeline ).