AudioCodes MediaPack MP-40 series, Руководство пользователя

Страница: 104 / 180

MediaPack BRI Series
User's Manual 104 Document #: LTRT-83702
6.2.2.9 Tel-to-IP Source Numbers
The Tel to IP Source Number Manipulation table is used to define rules for changing the
destination number received in telephone-to-IP calls. The table is processed from top to
bottom, where the first matching rule is used to manipulate the number. Processing stops
after the first successful manipulation.
Note: For a description on the convention for entering telephone numbers in the
Manipulation tables, refer to Section '
Convention for Entering Phone
Numbers in Tables ' on page 66 .
¾
To configure Tel-to-IP source numbers:
1. Open the Tel to IP Source Number Manipulation Table ( Protocol Management menu
> Manipulation Tables submenu > Tel
Æ
IP Source Numbers option).
Figure 6-13: Tel to IP Source Number Manipulation Table
2. From the ‘Position' drop-down list, select the entry that you want to add.
3. Configure the number manipulation table according to Table 6-10 .
4. Click the Insert button to insert an entry at the specified position.
5. To save the changes to the flash memory, refer to Section ' Saving Configuration
Settings on the MediaPack ' on page 146 .
You can modify an entry by clicking the Modify button and delete an entry by clicking the
Remove button.
Table 6-10: Tel-to-IP Source Number Manipulation Table
Parameter Description
Position Determines the priority of the configured manipulation rule, where "0" has the
highest priority.
Destination Number
[dest-num-match <num>]
Match the destination number [prefix, suffix, number]
Source Number
[src-num-match <num>]
Match the source number [prefix, suffix, number]
Number of Stripped Digits
[strip [prefix | suffix] <num>]
Strip the number of digits at the beginning of the number. If the number is included
in parenthesis "()", this function strips the suffix. A combination of prefix and suffix
e.g. 3(2) is valid.
Prefix (Suffix) to Add
[add [prefix | suffix] <num>]
Adds this prefix or (suffix). A combination of prefix and suffix e.g. 3(2) is valid.
Number of Digits to Leave
[leave <num>]
Number of remaining digits from the right.