User's Manual
A. MediaPack Applications
Version 2.2
165
July 2007
The procedure below describes the Fax configuration. This configuration applies to both
Unit A and Unit B.
¾
To configure the FAX parameters:
1.
Complete the initial settings configuration (refer to Section '
Initial Configuration
' on
page
39
).
2.
Configure the MediaPack ISDN-to-IP FAX settings:
•
Open the 'ISDN Profiles' screen (
Protocol Management
menu >
Profile
Definitions
submenu >
ISDN Profiles
option).
•
From the 'Fax Signaling Method' drop-down list, enable Fax data transfer protocol
by selecting either 'T.38 Relay' or 'G.711 Transport' (e.g. 'T.38 Relay').
Figure
A-7: Fax Transfer Enabled (e.g., T.38 Relay)
3.
Configure the MediaPack IP-to-ISDN Fax settings:
•
Open the 'IP Profiles' screen (
Protocol Management
menu >
Profile
Definitions
submenu >
IP Profiles
option).
•
From the 'Fax Signaling Method' drop-down list, select 'T.38 Relay'.
Содержание MediaPack MP-40 series
