AudioCodes MediaPack MP-40 series, Руководство пользователя

Страница: 101 / 180

User's Manual 6. Configuring the MediaPack
Version 2.2 101 July 2007
Table 6-7: IP to Tel Destination Number Manipulation Table
Parameter Description
Using CLI
To change the IP -> Tel destination number manipulations parameters:
1. Log on to the system.
2. From the main configuration mode, change to the “manipulation ip2tel dest-table” mode.
3. Enter a routing entry using the command:
pos <num> <values>
4. To remove a routing entry, use the command:
no pos <num>
For a detailed explanation of the supplied matching and manipulation criteria, use the online help
6.2.2.7 Tel-to-IP Destination Numbers
The Tel to IP Destination Number Manipulation table is used to define rules for changing
the destination number received in telephone-to-IP calls. The table is processed from top to
bottom, where the first matching rule is used to manipulate the number. Processing stops
after the first successful manipulation.
Note: For a description on the convention for entering telephone numbers in the
Manipulation tables, refer to Section '
Convention for Entering Phone
Numbers in Tables ' on page 66 .
¾
To configure Tel-to-IP destination numbers:
1. Open the Tel to IP Destination Number Manipulation Table ( Protocol Management
menu > Manipulation Tables submenu > Tel
Æ
IP Destination Numbers option).
Figure 6-11: Tel to IP Destination Number Manipulation Table
2. From the ‘Position' drop-down list, select the entry that you want to add.
3. Configure the Number Manipulation table according to Table 6-8 .
4. Click the Insert button to insert an entry at the specified position.
5. To save the changes to the flash memory, refer to Section ' Saving Configuration
Settings on the MediaPack ' on page 146 .
You can modify an entry by clicking the Modify button and delete an entry by clicking the
Remove button.