AudioCodes MediaPack MP-114, Руководство пользователя

Страница: 80 / 164

User's Manual 80 Document #: LTRT-71405
MediaPack Series
Parameter Description
Web: Password
Defines the Web user's password.
The valid value is a string of 8 to 40 ASCII characters, which must
include the following:

At least eight characters

At least two letters that are upper case (e.g., "AA")

At least two letters that are lower case (e.g., "aa")

At least two numbers

At least two signs (e.g., the dollar "$" sign)

No spaces in the string

At least four characters different to the previous password
Web: Status
Defines the status of the Web user.

New = (Default) User is required to change its password on the
next login. When the user logs in to the Web interface, the user is
immediately prompted to change the current password.

Valid = User can log in to the Web interface as normal.
Failed Access = This state is automatically set for users
that exceed a user-defined number of failed login attempts,
set by the 'Deny Access on Fail Count' parameter (see
'Configuring Web Security Settings' on page ). These users
can log in only after a user-defined timeout configured by
the 'Block Duration' parameter (see below) or if their status
is changed (to New or Valid) by a System Administrator or
Master.
Old Account = This state is automatically set for users that
have not accessed the Web interface for a user-defined
number of days, set by the 'User Inactivity Timer' (see
'Configuring Web Security Settings' on page ). These users
can only log in to the Web interface if their status is
changed (to New or Valid) by a System Administrator or
Master.
Notes:

The Old Account status is applicable only to Admin and Monitor
users; System Administrator and Master users can be inactive
indefinitely.

For security, it is recommended to set the status of a newly added
user to New in order to enforce password change.
Web: Password Age
Defines the duration (in days) of the validity of the password. When
this duration elapses, the user is prompted to change the password;
otherwise, access to the Web interface is blocked.
The valid value is 0 to 10000, where 0 means that the password is
always valid. The default is 90.
Web: Session Limit
Defines the maximum number of Web interface sessions allowed for
the user. In other words, this allows the same user account to log in to
the device from different sources (i.e., IP addresses).
The valid value is 0 to 5. The default is 2.
Note: Up to 5 users can be logged in to the Web interface at any
given.