AudioCodes MediaPack MP-114, Руководство пользователя

Страница: 25 / 164

User's Manual 4. Device Initialization & Configuration Files
Version 6.6 25 MediaPack Series
4.4 Configuration Parameters and Files
The device's configuration is stored in two file groups.

The Initialization file - an initialization (ini) text file containing configuration parameters
of the device.

The Auxiliary files - dat files containing the raw data used for various tasks such as
Call Progress Tones, Voice Prompts, logo image, etc.
These files contain factory-pre-configured parameter defaults when supplied with the
device and are stored in the device's non-volatile memory. The device is started up initially
with this default configuration. Subsequently, these files can be modified and reloaded
using either of the following methods:

BootP/TFTP during the startup process (refer to 'Using BootP/DHCP' on page 21).

Web Interface (refer to Configuration Using the Web Interface on page 43).

Automatic Update facility (refer to Automatic Update Facility on page 31).
The modified auxiliary files are burned into the non-volatile memory so that the modified
configuration is utilized with subsequent resets. The configuration file is always stored on
the non-volatile memory. There is no need to repeatedly reload the modified files after
reset.
Notes:
•
Users who configure the device with the Web interface do not require ini
files to be downloaded and have no need to utilize a TFTP server.
•
SNMP users configure the device via SNMP. Therefore a very small ini file
is required which contains the IP address for the SNMP traps.
4.4.1 Initialization (ini) File
The ini file name must not include hyphens or spaces. Use underscores instead.
The ini file can contain a number of parameters. The ini file structure supports the following
parameter value constructs:

Parameter = Value (refer to 'Parameter = Value Constructs' on page 163). The lists of
parameters are provided in the ini File Parameters chapter of the Product Reference
Manual.

Tables of Parameter Value (refer to 'Table of Parameter Value Constructs' on page
27).
The example below shows a sample of the general structure of the ini file for both the
Parameter = Value and Tables of Parameter Value Constructs.
[Sub Section Name]
Parameter_Name = Parameter_Value
Parameter_Name = Parameter_Value
.
..
; REMARK
[Sub Section Name]