AudioCodes MediaPack MP-114, Руководство пользователя

Страница: 33 / 164

User's Manual 4. Device Initialization & Configuration Files
Version 6.6 33 MediaPack Series
3. Create a file named master_configuration.ini, with the following text:
# Common configuration for all devices
# ------------------------------------
CptFileURL = 'http://www.corp.com/call_progress.dat'
# Check for updates every 60 minutes
AutoUpdateFrequency = 60
# Additional configuration per device
# -----------------------------------
# Each device will load a file named after its MAC address,
# e.g. config_00908F033512.ini
IniFileTemplateURL = 'http://www.corp.com/config_<MAC>.ini'
# Reset the device after configuration has been updated.
# The device will reset after all files were processed.
RESETNOW = 1
4. You can modify the master_configuration.ini file (or any of the config_<MAC>.ini files)
at any time. The device queries for the latest version every 60 minutes, and applies
the new settings immediately.
5. For additional security, usage of HTTPS and FTPS protocols is recommended. The
device supports HTTPS (RFC 2818) and FTPS using the AUTH TLS method (RFC
4217) for the Automatic Update facility.
6. To download configuration files from an NFS server, the file system parameters
should be defined in the configuration ini file. The following is an example of a
configuration ini file for downloading files from NFS servers using NFS version 2:
# Define NFS servers for Automatic Update
[ NFSServers ]
FORMAT NFSServers_Index = NFSServers_HostOrIP,
NFSServers_RootPath, NFSServers_NfsVersion;
NFSServers 1 = 10.31.2.10, /usr/share, 2 ;
NFSServers 2 = 192.168.100.7, /d/shared, 2 ;
[ \NFSServers ]
CptFileUrl =
'file://10.31.2.10/usr/share/public/usa_tones.dat'
VpFileUrl =
'file://192.168.100.7/d/shared/audiocodes/voiceprompt.dat'
If you implement the Automatic Update mechanism, the device must not be configured
using the Web interface. If you configure parameters in the Web interface and save (burn)
the new settings to the device's flash memory, the IniFileURL parameter (defining the URL
to the ini file for Automatic Updates) is automatically set to 0 (i.e., Automatic Updates is
disabled).
The Web interface provides a safeguard for the Automatic Update mechanism. If the
IniFileURL parameter is defined with a URL value (i.e., Automatic Updates is enabled),
then by default, the 'Burn To FLASH' field under the Reset Configuration group in the Web
interface's 'Maintenance Actions' page is automatically set to "No". Therefore, this prevents
an unintended burn-to-flash when resetting the device.
However, if configuration settings in the Web Interface were burnt to flash, you can re-
instate the Automatic Update mechanism, by loading to the device, the ini file that includes
the correct IniFileURL parameter setting, using the Web interface or BootP.