AudioCodes MediaPack MP-114, Руководство пользователя

Страница: 111 / 164

User's Manual 6. Configuration Using the Web Interface
Version 6.6 111 MediaPack Series
Parameter Description
Yellow Red Operation Details
[QOERules_YellowRedOperationD
etails]
Note: This field is currently not supported.
Defines the desired RTP redundancy depth. The actual
redundancy depth on the relevant call leg is the minimum
between the desired depth and the maximum supported
depth on that call leg.
Note: This field is applicable only if the 'Yellow Red Operation'
field is set to Activate 2198.
6.5.2.7.7.2 Configuring Bandwidth Management per Media Realm
Bandwidth management enables you to configure bandwidth utilization thresholds per
Media Realm which when exceeded, the device can do one of the following:

Generate an appropriate SNMP alarm, which is cleared when the bandwidth utilization
returns to normal.

Block any additional calls on the Media Realm.
Bandwidth management includes the following bandwidth utilization states:

Normal

High threshold

Critical threshold
When a transition occurs between two bandwidth threshold states, based on threshold and
hysteresis values, the device executes the configured action. The transition possibilities
include Normal-High threshold state changes and High-Critical threshold state changes.
Thus, up to two thresholds can be configured per Media Realm; one for each state
transition.
Notes:
•
This feature is available only if the device is installed with the relevant
Software License Key.
•
For your bandwidth management settings to take effect, you must reset
the device.
You can also use the BWManagement ini file parameter to configure
bandwidth management per Media Realm.

To configure bandwidth management rules per Media Realm:
1. Open the Media Realm Table page ( Configuration tab > VoIP menu > Media >
Media Realm Configuration ).
2. Select the Media Realm for which you want to configure bandwidth management
rules, and then click the Bandwidth Management link; the Bandwidth Management
page appears.
3. Click the Add button; the following dialog box appears: