AudioCodes MediaPack MP-114, Руководство пользователя

Страница: 127 / 164

User's Manual 6. Configuration Using the Web Interface
Version 6.6 127 MediaPack Series
2. Use the Browse button to locate the appropriate file on your PC.
3. Click Send File . The files are sent to the device.
4. To commit the changes to the non-volatile (flash) memory, click on the Burn button on
the Toolbar.
Note: A device reset is required to activate a loaded CPT file, and may be
required for the activation of certain ini file parameters. The Burn option must be
selected.
6.6.2.2 Software Upgrade Key
The device is loaded with a Software Upgrade Key already pre-configured for each of its
TrunkPack Modules.
Users can later upgrade their device features, capabilities and quantity of available
resources by specifying the upgrades they require and the corresponding blade's or TPM's
serial number (or MAC address), and ordering a new key to match their specification.
The Software Upgrade Key is sent as a string in a text file, to be loaded into the device.
Stored in the device’s non-volatile flash memory, the string defines the features and
capabilities allowed by the specific key purchased by the user. The device allows users to
utilize only these features and capabilities. A new key overwrites a previously installed key.
Note: The Software Upgrade Key is an encrypted key provided by AudioCodes
only.
6.6.2.2.1 Backing up the Current Software Upgrade Key
Back up your current Software Upgrade Key before loading a new key to the device. You
can always reload this backed-up key to restore your device capabilities to what they
originally were if the ‘new’ key does not comply with your requirements.

To back up the current Software Upgrade Key:
1. Open the Software Upgrade Key page ( Maintenance tab > Software Update menu >
Software Upgrade Key ).
2. Copy the string from the Current Key field and paste it in a new file.
3. Save the text file with a name of your choosing.
6.6.2.2.2 Loading the Software Upgrade Key
After receiving the Software Upgrade Key file (do not modify its contents in any way),
ensure that its first line is [LicenseKeys] and that it contains one or more lines in the
following format:
S/N<Serial Number of TrunkPack module> = <long Software Upgrade Key>
For example: S/N370604 = jCx6r5tovCIKaBBbhPtT53Yj...
One S/N must match the S/N of your device TrunkPack module. The device’s S/N can be
viewed in the Device Information page (refer to 'Device Information' on page 140).