AudioCodes Mediant 8000, Инструкция по установке, эксплуатации и обслуживанию

Страница: 374 / 924

Installation & Operation Manual 374 Document # LTRT-92224
Mediant 8000
4.
At the
Choose submenu
prompt, type
pwd
and press
Enter
. The CHANGE
USER PASSWORD menu appears.
Choose submenu : pwd
CHANGE USER PASSWORD
5.
At the
User Name
prompt, type the desired username and press
Enter
.
6.
At the
When password should expire
prompt, type the password expiration
date (number of days). To configure a password without an expiration date, type
0
.
When password should expire? ([0-never]/number of days) : 100
Note:
For improved security, it is strongly recommended to use an expiration date
for all passwords.
7.
At the
Prevent too often password changes
prompt, type the minimum interval
between password changes (number of days). For not limiting the password
change time interval, type
0
.
Prevent too often password changes? ([0-no]/number of days) : 1
Note:
For improved security, it is strongly recommended to limit password changes
to not more than 1 change per day. This limitation affects only password change
operations performed by users. The administrative super-user (
root
) may alter the
password of any user regardless of any time limitations.
8.
At the
New Password
prompt, type the new password.
New Password:*******
9.
At the
Re-enter new Password
prompt, type the new password again.
Re-enter new Password:*******
The new password is configured on the Active SC board and immediately
replicated to the Standby SC board. Therefore, there is no need to repeat steps
1-9 on the Standby SC.