AudioCodes Mediant 8000, Инструкция по установке, эксплуатации и обслуживанию

Страница: 151 / 924

Version 6.6 151 October 2014
Installation & Operation Manual 21. Software Installation and Basic Configuration
client241::~# install
Found uncompressed Audiocodes installation package...
Verify installation package integrity...
SC Software Installation & Basic Configuration
1 - Change network configuration.
2 - Install the software.
3 - Change basic configuration.
4 - Copy basic configuration from Active SC.
5 - Uninstall the software.
0 - Quit.
Choose (0-5) : 4
5.
You will be prompted to enter the IP address of the SC board to operate as the
Active board. Enter the corresponding IP address and press
Enter
.
Active SC IP Address [10.7.13.91]: 10.7.13.91
Verify that Active SC 10.7.13.91 responds to ping...
10.7.13.91 is alive
Configuration will be copied from Active SC 10.7.13.91 via SSH.
6.
At the
CLI user name
prompt, enter the name of a regular CLI user on the Active
SC board (e.g.,
acladmin
) .Refer to 'Command Line Interface Users' on page
113 for more details.
Please provide CLI user credentials:
CLI user name [acladmin] : acladmin
7.
At the
CLI user password
prompt, enter the password of the specific CLI user
on the Active SC board (e.g.,
pass_1234
).
CLI user password : *********
8.
At the
ROOT user password
prompt, enter the password of
root
user on the
Active SC board (e.g.,
root
).
ROOT user password : ******
Note:
If you changed
root
password as part of the Active SC software basic re-
configuration, ensure that you enter the new
root
password at this prompt.