AudioCodes Mediant 8000, Инструкция по установке, эксплуатации и обслуживанию

Страница: 273 / 924

Version 6.6 273 October 2014
Installation & Operation Manual 30. Time and Date Configuration
30.7 Viewing NTP Servers' Status

To view NTP servers' status:
1.
Click the button to access the Media Gateway status screen.
2.
In the Navigation pane, select
Time And Date NTP Servers
; the NTP Servers
list is displayed.
3.
Select a specific row and then in the configuration pane, click
NTP Server
Settings
; the NTP Server Settings screen is displayed.
4.
Select the
General Information
tab to view the status of the NTP server as
described in the table below.
Table 30-2: NTP Server Status Parameters
Parameter Name Type Provisioning
Type
Description
NTP Server
Status Enum
Reject, Falsetick,
Excess, Outlyer,
Selected,
Candidate,
SysPeer, PpsPeer
Read-Only Indicates the status of the connectivity
between the Media Gateway and the NTP
server.
The following values are supported:

Reject
– server is discarded due to
high stratum and/or failed sanity
checks

Falsetick
– server is designated false
ticker by the intersection algorithm

Excess
– server is picked out from the
end of the candidate list

Outlyer
– server is discarded by the
clustering algorithm

Selected
– server is selected for
synchronization, however distance
exceeds maximum

Candidate
– server is included in the
final synchronization selection list

SysPeer
– server is selected for
synchronization

PpsPeer
– server is selected for
synchronization; Pulse-per-second
(PPS) signal in use
Reference ID String Read-Only Identifies the reference clock of a specific
NTP Server. A Reference ID that starts
with 127.127 indicates that the NTP
Server currently generates the clock from
its local clock source (hardware clock).