AudioCodes Mediant 8000, Инструкция по установке, эксплуатации и обслуживанию

Страница: 295 / 924

Version 6.6 295 October 2014
Installation & Operation Manual 32. V5.2 Access Gateway
32.1.1.2 V5.2 Link Status and Maintenance Actions
The V5.2 Interface uses an additional attribute –
Link Operational State
– to indicate
its precise status. The valid values are:

Operational – link is "in service"

Failed – service is not provided due to some communication error with the far-end

Blocked – service is not provided due to
Block
maintenance request by local
user

Blocked and Failed – service is not provided due to both
Block
maintenance
request by local user and a communication error with the far-end
The following maintenance actions are supported on V5.2 Links:

Add / Remove
– adds/removes V5.2 Link

Unlock / Lock
– adds/removes the configuration of the corresponding V5.2
Interface to/from the corresponding Media Gateway board (note that it's not
enough to
Unlock
the V5.2 Link to bring it to service – you must also use
In
Service
action on the corresponding V5.2 Interface)

Block / Unblock
– temporarily stops/starts the service on the corresponding V5.2
Link; if user port is busy (in call), the
Block
action is deferred until the port goes
on-hook; block/unblock actions may also be performed by the soft-switch

Link ID Check
– initiates the link identification check that ensures that there is no
mismatch between the ends of the link; the link's
Link ID Check Status
attribute
is updated accordingly. In addition to the manual initiation (by user), the
identification check is automatically performed on a V5.2 link by either peer at
startup time or after the link recovers from a physical failure.
32.1.1.3 V5.2 User Ports Status
The Mediant 8000 maintains the current V5.2 User Ports configuration in an auxiliary
file named
SlotX_V52_FILE.csv
. The file can be found in auxiliary files repository
(refer to 'Auxiliary Files Repository' on page 422 ) and may be downloaded to your PC
and opened in a text or CSV editor to view the current V5.2 User Ports configuration.

To download the V5.2 User Ports Configuration File:
1.
Click to access the Media Gateway status screen.
2.
In the Navigation pane, select
Management Files
; the Files list is displayed.
3.
Find an auxiliary file that represents the current V5.2 User Ports configuration on
the specific Media Gateway board (it is named
SlotX_V52_FILE.csv
, where X is
the slot number, and its file type is "V5 Ports Configuration").
4.
Right-click on the auxiliary file and choose
Download File
action.
5.
Choose the location where to download the file (either on your PC or on a file
server) and press
OK
.