AudioCodes Mediant 8000, Инструкция по установке, эксплуатации и обслуживанию

Страница: 160 / 924

Installation & Operation Manual 160 Document # LTRT-92224
Mediant 8000
For detailed information on using the EMS see the following documents:

EMS User’s Manual , Document # LTRT 910xx

EMS Release Notes - Document # LTRT-912xx

Mediant 5000 and Mediant 8000 Alarm and Performance Monitoring Guide -
Document # LTRT-237xxx
23.3 SNMP Management Interface
The SNMP management interface is used by the EMS server and/or standards-
compliant 3
rd
party SNMP managers to perform most of the Mediant 8000
management, configuration and status monitoring tasks. For detailed information, see
'SNMP Management Interface' on page
170 .
23.4 CLI Management Interface
In addition, a CLI (command line) interface may be used for management,
configuration and status monitoring. For detailed information, see:

CLI Reference - Document # LTRT-892xx
23.5 Syslog Management Interface
In addition, a Syslog management interface may be used to perform status monitoring.
For detailed information, see 'Syslog Management Interface' on page
175 .
23.6 Managed Objects, Administrative and Operational
State
The operational configuration and status of the Mediant 8000 Media Gateway uses an
ITU-T X.730/731 compatible data model.
The operational configuration and status of the Mediant 8000 Media Gateway is
represented by a set of
Managed Objects (MOs)
, which combine physical and logical
resources. Each MO contains multiple attributes that represent different properties of
specific resource. Each attribute has access permissions (
read-write
or
read-only
)
that indicate whether specific property may or may not be modified by the user.
Examples of MOs that represent physical resources are: Media Gateway, Media
Gateway Board, and E1/T1 Trunk.
Examples of MOs that represent logical resources are: SS7 Node, Firewall Profile,
and Media Gateway Controller (Call Agent).