FLEXNET – FNER Expandable (Modular) Routing Switches – Installation & Operation Manual
8-3
CHAPTER 8: ACCESS CONTROL
Figure 41: Keypad Locked
8.5.2 Unlock Keypad
To remove the keypad lock, press any key on the keypad. The Unlock Keypad Screen will be displayed shown in Figure 42.
Figure 42: Unlock Keypad
8.5.3 Unlock Keypad Code
Enter the numeric sequence “857”. After a few seconds, you will be returned to the Keypad Lock Screen. The numeric
sequence equates to the letters “UKP” on a telephone keypad. This acronym stands for Unlock Key Pad. Entering an invalid
code or pressing the F4 key will redisplay the Keypad Locked message.
8.6 Logging In & Logging Out
A user is automatically logged out when the MPC 128 module is reset, or if the Ethernet socket is closed or broken.
Once access control is enabled for a port then a user must login on that port before issuing any commands except those that
are allowed with no login. For the computer interface ports PC Control In, Telnet and Ethernet, the ZI protocol command is
used to login. For the Ethernet Telnet console window, any standard Telnet program may be used to bring up a text window
with a login prompt.
8.6.1 Login/Logout
To get to the Login/Logout screen from the main menu: key sequence 3, 2.
3. Access Control
2. Login/Logout
Figure 43: Login /Logout
In the Login/Logout Screen 1: Admin (or the current Admin username) should be displayed. The user ID (UID) is always
displayed in front of the username since all usernames including Admin may be customized. Use the scroll keys to scroll
through the available usernames. Once the desired username is shown push F1 to select the user to log in as.
8.6.2 Password Entry
Once you have selected the desired username, the screen will change to the Password Entry screen shown in Figure 44.
